Setting Attenuation
Setting the Number of Digits displayed
Selecting the Power Units
Keysight N77xx Series
Figure 37
Technical Support N7744A
On this webpage you will also find additional software tools like:
•
Firmware update utility
•
Firmware update file
•
VXI Plug&Play Drivers
When the power is displayed with the Viewer program, you can set the
maximum number of digits that are used in power measurement. This
is the maximum number of digits after the decimal point.
The Power Unit setting allows you to select either Watts (W) or dBm as
the units in which the output power is displayed or controlled.
Attenuation or offset values are in dB, and are the power relative to the
input power.
Attenuation 2
51