Table of Contents
Advertisement
1
Introduction
The Display Layout
Figure 1-2
numeric mode.
Clicking
Figure 1-2
1 The status reporting line displays messages and the control status of the
The message fields indicate ERR for any error conditions that occur or informing
you to Please Zero the power sensor.
2 The blue highlight on the right hand side of the window shows it is the
3 The measured channel is shown. With a P-Series Power Sensor connected,
4 The associated measurement type is shown below the channel and gate
5 This displays the measurement units, either dBm, dB, Watts, or percent (%).
30
shows the display layout when two windows are configured in dual
Disp Type
,
1
3
4
6
Dual numeric display
power meter. For example, the status can be display as RMT (remote).
currently selected measurement display line. This measurement line is the
Upper Window/Upper Measurement.
and channel in trigger mode, the associated gate number is shown.
number.
the other display formats are available.
Keysight N8262A User's Guide
9
2
8
5
7
Advertisement
Table of Contents
