Figure 1-5 Trace Display In Both Windows - Keysight Technologies N8262A P Series User Manual

1 Introduction
The following trace displays are only available when a P-Series Power Sensor is
NOTE
connected.
23
Figure 1-5
22
23 The
Single or continuous triggering (
NOTE
the Acqn menu to view a trace window. The Acqn menu is accessed by clicking
34
Trace display in both windows
Figure 1-5 shows both windows configured to trace display mode. This is only
available when a P-Series Power Sensor is connected. The captured trace,
channel, and scaling are displayed. The lower window is the selected window.
indicates the point on the trace where trigger event occurs.
, .
Trigger Trace
or
Sing Trig
is disabled when
Free Run
22
) must be selected from
Cont Trig
is selected.
Keysight N8262A User's Guide