2
General Power Meter Functions
Setting the Pulse Reference Levels
– Click
– Click
– Click the
Figure 2-4
Trace Ref Lvl 1 and Trace Ref Lvl 2 are used in calculation of transition durations
NOTE
and occurrences.
Pulse Duration Ref Lvl allows pulse duration measurements between
NOTE
non-standard reference levels.
48
and proceed to the second page of Sys/Inputs menu by clicking
the
softkey.
1 of 2
softkey to display the Measurement Configuration screen.
Meas Config
Channel A B
Measurement configuration screen
softkey to select the desired channel.
Keysight N8262A User's Guide