Meter B/W
Setting
Figure 2-20
When video bandwidth is set to Off, it removes all digital signal conditioning. This
provides approximately 3 dB roll off at the maximum sensor's bandwidth and is
best suited for accurate trace capture, minimizing overshoot, and removing any
ringing effects caused by the sharp cut-off filters used in the Low, Med and High
settings.
Wideband Power Sensors.
Procedure
Set the video bandwidth as follows:
1 Click
2 Use the
Keysight N8262A User's Guide
Amplitude
0
–3.5 dB
Approx
5 MHz 15 MHz
Low
Med
High
Off
Band width filter shapes
Figure 2-20
shows the filter shapes associated with the P-Series
. Click
Channel
and
softkeys to select the Video B/W setting field.
General Power Meter Functions
P-Series Sensors
Frequency
30 MHz
to select the required channel.
2
67