Keysight Technologies N8262A P Series User Manual page 26

1 Introduction
Key
26
These softkeys are located to the left of the display.
Function
Click this softkey to access general configuration-menus, such as IP address.
You can also access the Self-Test and Table entry menus. The measurement
screen remains visible.
Click this softkey to access the channel configuration menus. Channel
parameters such as averaging and offsets are configured from this menu.
Click this softkey to access the triggering menu. Unless a P-Series Sensor is
connected, all the menu softkeys are disabled (grayed out).
Click this softkey to setup relative measurements or set display offsets.
Use this softkey to configure the selected measurement.
Click this softkey to access the measurement display menu. You can choose
the displayed measurement resolution, units and display format.
Use this softkey together with
displays.
to configure measurement
Keysight N8262A User's Guide