General Description; Hardware Specifications; Electronic Specifications - Assa Abloy SARGENT Profile Series Installation Instructions Manual

Profile Series v.S2 WiFi Exit Device

General Description

2
The SARGENT Profile Series v.S2 Exit Device is available with either an HID® 125 kHz Prox or 13.56 MHz
iCLASS® technology reader. Either can be used in applications requiring wireless access control. The v.S2 is a
self-contained microprocessor-controlled access control product with non-volatile memory. It is able to utilize
the existing wireless LAN (802.11b/g) in order to communicate with the access control system. The v.S2 lock
will hold a total of 24000 unique users per lock.
This product is operated by six (6) "AA" alkaline batteries or by SARGENT 3267 9VDC power supply. SARGENT
Exit Devices are designed with quality components to provide high security, performance and durability.
The Profile v.S2 exit device may be used for both indoor and exterior applications. A weather protective gasket
(provided with unit) is recommended for exterior applications.
HID® and iCLASS® are registered trademarks of HID Global Corporation.

Hardware Specifications

3
Profile Series Rim Exit Device
• Latch – 3/4" throw, stainless steel
• Accepts all SARGENT rim cylinders (8877 only)
• Key retracts latch (8877 only)
Profile Series Mortise Exit Device
• Latch – 3/4" throw, anti-friction, brass
• Accepts all SARGENT mortise cylinders
(8977 only)
• Key retracts latch (8977 only)

Electronic Specifications

4
• Wireless (WiFi 802.11 b/g) online, battery-operated
• 2400 users per lock
• 10,000 event audit trail
• Centralized lock management
• Input Power: DC 9V, 1.5A (6 AA alkaline batteries
or optional hard-powered)
• Supports HID® 125 kHz prox or 13.56 MHz
iCLASS® credentials (26 - 39 bit); supports CSN
reads for other common 13.56 MHz cards, including
MiFare, DesFire, and Felica
SARGENT Profile Series WiFi
v.S2 Typical Application
Internal
Building
Network (Intranet)
Ethernet LAN
Network
Interface
Card
Lock Management
Tool (LMT)
Profile Series Rim and Mortise Exit Devices
• Profile Series exit devices furnished for
1-3/4" doors
• UL Listed
• Fire stop provided on all lever handle designs
• Outside motor driven "ET" lever controlled
by keypad
• Available in "ET" lever handle designs only
• Push bar retracts latch from inside
• Real Time Door Status Monitoring*
• Easy installation (no need to hardwire)
• Lockdown capable*
• Supports most current WiFi networks security standards
• For specific security information, please contact a local
ASSA ABLOY Door Security Solutions sales consultant
or call 800-810-WIRE
*
Lockdown and real-time door status monitoring available only when
lock is hard-powered
802.11b/g Wireless Network Device
v.S2 Lock
A7787F 3