Table of Contents
Advertisement
General Description
2
The SARGENT Harmony Series H2 and IDP-H2 mortise locks are designed to interface with
Wiegand Electronic Access Control (EAC) panels. The reader requires 12 or 24VDC for power
and is compatible with HID
backed by SARGENT's Grade 1 hardware.
The H2 mortise lock comes with Request to Exit (RX) monitoring within the lock body.
The IDP-H2 mortise lock includes Request to Exit (RX) and an Integrated Door Position switch -
this internal magnetic switch is wired in series with the latchbolt (LX) and auxiliary bolt (AX),
offering added security and improved aesthetics.
Featuring EcoFlex™ technology, the mortise lock is field-configurable to fail-safe or fail-secure
and operates from 12-24VDC. The Harmony H2 reader provides visual (LED) and audible indication
of lock state (locked/unlocked).
Technical Specifications
3
•
Latch: Stainless steel, 3⁄4" projection, one-piece
•
Deadbolt: One-piece hardened stainless steel
•
Guardbolt: Stainless steel, non-handed
•
Handed: Easily field reversible without opening case
•
Case: 12 gauge heavy duty wrought steel
•
Field-selectable to Fail Safe or Fail Secure
• Door position switch within lock body
• Inside lever provides RX signal and retracts
latch and deadbolt
• Lock to be configured* as Fail Safe or
Fail Secure per AHJ compliance as part of
initial lock configuration
• Locks furnished for 1-3/4" doors. Other door
thicknesses require confirmation with factory.
Regulatory Specifications
4
• Reader Draw = 150mA @12VDC / 24VDC
• Actuator Draw = 400mA inrush / 15mA continuous @12VDC / 24VDC
• Total System Draw = 550mA @12VDC / 24VDC
• UL 294 Access Control Performance Ratings:
•
UL294 6th Edition (Access Control System Units)
•
This product meets the requirements of CAN/ULC-S319-05 Equipment Class I
•
ANSI/BHMA A156.25 Listed Grade 1 Compliant ANSI/BHMA A156.25 Listed Grade 1 Compliant
Wiring methods shall be in accordance with the National Electrical Code (ANSI/NFPA70), CSA 22.1, Canadian Electrical
Code (CEC), Part I, Safety Standard for Electrical Installations, local codes, and the authorities having jurisdiction.
iCLASS SE
technology. Harmony Series technology is
®
®
3
Harmony Series H2 Mortise Lock
• Weather seal gaskets are also included for
outside use on exterior door applications only
• Supported credentials:
• iCLASS
®
• iCLASS SE
• iCLASS
Seos
®
• HID SIO on MIFARE
• HID SIO on MIFARE DESFire
• NFC-enabled mobile phones
Destructive Attack
Line Security
Endurance
Standby Power
A8027G • 800-810-WIRE (9473) • www.sargentlock.com
(SIO-enabled)
®
®
Classic
®
EV1
®
Level I
Level I
Level IV
Level I
Advertisement
Table of Contents
