General Description; Hardware Specifications; Electronic Specifications - Assa Abloy Corbin Russwin IN120 Installation Instructions Manual

IN120 / IN220
FE6600/BL6600/MP6600 Series
Multi-point Lock
Installation Instructions
3

General Description

The Corbin Russwin IN120 Wi-Fi and IN220 PoE series locks offer HID
streamlined design, setting a new standard for aesthetics and performance, providng heightened identity
security and multiple credentials, including mobile access.
The IN120 multi-point lock uses IEEE 802.11 Wi-Fi communication and a flexible feature set for easier,
more cost-effective installations, allowing facilities to leverage their IT infrastructure to expand access
control coverage to more doors.
With the energy efficiency and streamlined architecture of Power-over-Ethernet (PoE) access control, the
IN220 multi-point lock allows for enhanced security and easier, more cost-effective installations.
4

Hardware Specifications /

• Complete lockset with on-board memory
• ADA compliant
• Easily retrofits existing door preps
• Latch - Stainless steel
• Optional deadbolt - Hardened steel
• Guardbolt - Stainless steel, non handed
• Handing (RH/RHR/LH/LHR) must be specified, but is
easily field-reversible without opening the lock case.
5

Electronic Specifications

HID multiCLASS SE
®
the following credentials:
High Frequency (13.56 MHz)
•
•
•
•
•
•
•
•
Low Frequency (125 kHz):
•
NFC & BLE-enabled mobile phones
•
•
For installation assistance contact Corbin Russwin
1-800-543-3658 • techsupport.corbinrusswin@assaabloy.com
Copyright © 2019-2021 ASSA ABLOY Access and Egress Hardware Group, Inc. All rights reserved. Reproduction in whole
or in part without the express written permission of ASSA ABLOY Access and Egress Hardware Group, Inc. is prohibited.
technology offers support for
®
HID iCLASS
®
HID iCLASS SE (SIO-enabled)
®
HID iCLASS Seos
™
HID MIFARE SE
®
HID DESFire EV1 SE
HID MIFARE Classic
®
DESFire EV1
PIV/PIV-I**
**(40-bit BCD, 64-bit BCD, 75 bit, 128-bit or 200-bit outputs)
HID Prox
®
HID Mobile Access (BLE & NFC)
®
Apple Wallet Seos or DESFire
• Case - 12 gauge heavy duty wrought steel
• Lock furnished for 1-3/4" doors. For other
thicknesses, consult factory.
• Outside lever controlled by any combination of
contactless reader. Inside lever retracts both latch
and deadbolt.
• May be used for indoor and outdoor applications.
• ANSI/BHMA A156.25 Listed Grade 1 Compliant
• Optional keypad:
• PIN-only usage or dual authentication*
• Multiple time zone and holiday access scheduling
• First-in unlock or automatic unlock configuration,
based on specified time schedule
• 10,000 per lock; 10,000 event audit trail
• Privacy button
• Wi-Fi (IEEE 802.11 b/g/n)
• PoE (IEEE 802.3af)
Power requirements:
•
•
•
*For specific security information, please contact your
local ASSA ABLOY Door Security Solutions sales
(NFC)
®
consultant or call 800-810-WIRE.
multiCLASS SE
® ®
Alkaline AA Batteries: 9V, 300mA
PoE - 55VDC, 90mA
Optional Hard Power :
9-24VDC, 300mA
5
technology in a
FM455 04/21