Advertisement
AL-PE80 Series
Alarmed Exit Devices
Installation Instructions
1
General Description
The SARGENT Alarmed Exit is designed for areas that require an alarm to sound upon exiting. Once
armed, any push rail movement will activate the horn in the push rail. The horn will continue to sound for
two minutes and then shut off automatically. The LED will flash indicating a violation has occurred.
Manual dogging is provided standard on
non fire rated devices.
Notes:
•
Installation must be performed by a trained service person.
•
Basic installation is 9V alkaline battery operated. For hardwired option use 546 Wiring harness -
See instruction sheet included with kit.
•
Field cut rail assemblies are not allowed. Exit device must be ordered from the factory for specific door width.
Tools Needed
1-800-727-5477 • www.sargentlock.com
Copyright © 2023, SARGENT Manufacturing Company. All rights reserved. Reproduction in whole or in part without
the express written permission of SARGENT Manufacturing Company is prohibited. Patent pending and/or patent
www.assaabloydss.com/patents.
1" diameter hole(s) required for routing wires
into the door when remote option(s) is used.
2
A8325-1 05/23
Advertisement
