Table of Contents
Advertisement
SE LP10
FE6600/BL6600/MP6600 Series Multi-point Lock
Installation Instructions
1
Warning, continued
2
General Description
The Corbin Russwin SE LP10 multi-point lock is designed to interface with existing Wiegand Electronic
Access Control (EAC) panels. The reader requires 12VDC for power and features HID
technology. SE LP10 is backed by Corbin Russwin's Grade 1 hardware.
The multi-point lock comes with Request to Exit (RX) & Door Position Switch (DPS) monitoring inside
the lock body and operates from 12-24VDC.
3
Features
• Latch: Stainless steel, 3⁄4" projection, one-piece
• Deadbolt: One-piece hardened stainless steel
• Guardbolt: Stainless steel, non-handed
• Handed: Easily field reversible without opening case
• Case: 12 gauge heavy duty wrought steel
• Outside lever controlled by compatible credential
• Inside lever provides RX signal and retracts latch and deadbolt
• Field-selectable to Fail Safe or Fail Secure
•
Complete monitoring of door includes request to exit and door position monitoring with
optional end-of-line resistors
•
Door position switch (DPS) within lock body
•
Locks furnished for 1-3/4" doors. Other door
thicknesses require confirmation with factory.
•
UL and CUL listed for use on Fire Doors
•
Wires directly to EAC Panels
•
Supports multiple credential formats:
For installation assistance contact Corbin Russwin
1-800-543-3658 • techsupport.corbinrusswin@assaabloy.com
Copyright © 2017, 2020 ASSA ABLOY Access and Egress Hardware Group, Inc. All rights reserved. Reproduction in whole
or in part without the express written permission of ASSA ABLOY Access and Egress Hardware Group, Inc. is prohibited.
If the SE LP10 reader is installed with a module (See Section 7-h), make sure that the reader is powered
down when inserting/removing the module; i.e., do not "hot-plug" (remove/insert while reader is
powered) module as it may damage the reader.
• 2.4 GHz credential compatibility
• Secure Identity Object
• 13.56 MHz credential compatibility:
• Secure Identity Object™ (SIO) on iCLASS Seos
®
iCLASS SE
/SR, MIFARE DESFire
MIFARE Classic
®
(on by default)
• Standard iCLASS Access Control Application, ISO14443A
(MIFARE) CSN, ISO14443B CSN, and ISO15693 CSN
• ISO14443A/B (PIV-compatible Transparent FASC-N read)
available with SE LP10-F
• NFC-enabled mobile phones
• 125 kHz credential compatibilty:
• HID Prox
®
, AWID, EM4102
™
(SIO) on Mobile IDs (Bluetooth Smart)
®
,
®
EV1 and
®
multiCLASS SE
4
®
FM456 08/20
Advertisement
Table of Contents
