Valve Terminal Design - Festo MPA-C Series Manual

2 Overview
2.2

Valve terminal design

The valve terminal consists of pneumatic and electric components. The most important components are
shown in Fig. 2.1.
1
1
Left end plate with
– multi-pin plug connection or
I-port interface/IO-Link
– supply ports (1), (3) and (5)
2
Manifold sub-base with auxiliary power supply:
– supply ports (1), (3) and (5)
– working ports (2) and (4)
– valve with cover, optionally with manual
override
– electronics module
Fig. 2.1 Main components of the valve terminal
12
2
3
Right end plate with:
– ports (1), (3), (5) (12/14), (82/84) and (L)
4
Manifold sub-base with:
– working ports (2) and (4)
– valve with cover, optionally with manual
override
– electronics module
5
Spacer bolt
Festo – GDCV-MPAC-EN – 1407NH – English
3
4
4
5