D-Link DGS-1250 Series Reference Manual page 69

DGS-1250 Series Gigabit Ethernet Smart Managed Switch Web UI Reference Guide
DHCPv6 Relay Format Type Settings
This window is used to display and configure the DHCPv6 relay format type settings. This is used to configure
DHCPv6 relay Option 37 and Option 18 of the expert UDF string of each port.
To view the following window, click Management > DHCP > DHCPv6 Relay > DHCPv6 Relay Format Type
Settings, as shown below:
The fields that can be configured are described below:
Parameter
From Port - To Port
Type
Format Type Expert UDF
Click the Apply button to accept the changes made.
DHCPv6 Local Relay VLAN Settings
This window is used to display and configure the DHCPv6 local relay VLAN settings. When DHCPv6 local relay is
enabled, it will add Option 37 and Option 18 to the request packets from the client. If the check state of Option 37 is
enabled, it will check the request packet from the client and drop the packet if it contains the Option 37 DHCPv6 relay
function. If disabled, the local relay function will always add Option 37 to request packets, whether the state of Option
37 is enabled or disabled. The DHCPv6 local relay function will directly forward the packet from the server to the
client.
To view the following window, click Management > DHCP > DHCPv6 Relay > DHCPv6 Local Relay VLAN Settings,
as shown below:
Figure 4-36 DHCPv6 Relay Format Type Settings Window
Description
Select the range of ports that will be used for this configuration here.
Specifies to configure the Expert UDF format type string for DHCPv6 Option 37.
Enter the format type expert UDF string that will be used on the specified port(s)
here.
Figure 4-37 DHCPv6 Local Relay VLAN Settings Window
60