D-Link DGS-1250 Series Reference Manual page 163

DGS-1250 Series Gigabit Ethernet Smart Managed Switch Web UI Reference Guide
IPv4
After clicking the IPv4 radio button and the Next button, the following window will appear.
Figure 8-5 ACL Configuration Wizard (Create, Packet Type, IPv4) Window
The fields that can be configured are described below:
Parameter
Sequence No.
Protocol Type
The fields that can be configured in Assign rule criteria are described below:
Parameter
Source
Description
Enter the ACL rule number here. This value must be between 1 and 65535. Select
Auto Assign to automatically generate an ACL rule number for this entry.
Select the protocol type option here. Options to choose from are TCP, UDP,
ICMP, EIGRP (88), ESP (50), GRE (47), IGMP (2), OSPF (89), PIM (103), VRRP
(112), IP-in-IP (94), PCP (108), Protocol ID, and None.
• Value - The protocol ID can also manually be entered here. The range is
from 0 to 255.
• Fragments - Select this option to include packet fragment filtering.
Description
Select and enter the source information here. Options to choose from are Any,
Host, and IP.
• When the Any option is selected, any source traffic will be evaluated
according to the conditions of this rule.
• When the Host option is selected, enter the source host IP address here.
154