Poe Scheduling - D-Link DGS-1250 Series Reference Manual

DGS-1250 Series Gigabit Ethernet Smart Managed Switch Web UI Reference Guide
Icon

PoE Scheduling

This window is used to display and configure the PoE scheduling settings.
To view the following window, click PoE Scheduling, as shown below:
The fields that can be configured in the Time Range section are described below:
Parameter
Range Name
From: Time (Week/HH)
To: Time (Week/HH)
Description
This displays the maximum PoE budget available on this port.
This displays the current PoE status on the port. This status can be one of the
following: -, Searching, Delivering, or Power Denied.
When the Power Denied message is displayed, click on the link to redirect the
Health Diagnostic window for more information.
This displays the PoE consumption and power class of the PD connected to the
port.
Figure 14-12 PoE Scheduling Window
Description
Enter the name of the time range schedule here. Tick the Daily option to use this
schedule for every day of the week.
Select the starting day and hour in the time range schedule here.
Alternatively, click the
selection.
Select the ending day and hour in the time range schedule here. The schedule will
end at the end of the selected hour.
Alternatively, click the
selection.
263
icon to open a calendar for easy day and hour
icon to open a calendar for easy day and hour