Surveillance Settings - D-Link DGS-1250 Series Reference Manual

DGS-1250 Series Gigabit Ethernet Smart Managed Switch Web UI Reference Guide

Surveillance Settings

This window is used to display and configure the surveillance settings. The Switch has only one Surveillance VLAN.
This surveillance VLAN also supports to recognize the surveillance devices, like IP Cameras (IPC) and Network Video
Recorders (NVR), using the ONVIF protocol.
To view the following window, click Surveillance Settings, as shown below:
The fields that can be configured in the Surveillance VLAN Settings section are described below:
Parameter
VLAN ID
Click the Apply button to accept the changes made.
The fields that can be configured in the IP Settings section are described below:
Parameter
Get IP From
IP Address
Mask
Figure 14-19 Surveillance Settings Window
Description
Enter the ID of the surveillance VLAN here. The range is from 2 to 4094.
Description
Select the method used to configure the IP address settings on the Switch here.
Options to choose from are:
• Static - Specifies that the IP address settings will be manually configured.
• DHCP - Specifies that the IP address settings will be automatically obtained
from a DHCP server on the network.
Enter the IPv4 address of the Switch here.
Enter the IPv4 subnet mask of the Switch here.
268