D-Link DGS-1250 Series Reference Manual page 137

DGS-1250 Series Gigabit Ethernet Smart Managed Switch Web UI Reference Guide
The fields that can be configured are described below:
Parameter
Interface VLAN
Click the Apply button to accept the changes made.
Click the Find button to locate a specific entry based on the information entered.
Click the Edit button to re-configure the specific entry.
Click the Delete button to remove the specific entry.
Enter a page number and click the Go button to navigate to a specific page when multiple pages exist.
After clicking the Edit button, the following page will be available.
The fields that can be configured in the Settings section are described below:
Parameter
State
Click the Back button to return to the previous window.
Click the Apply button to accept the changes made.
The fields that can be configured in the Primary IP Settings section are described below:
Parameter
Get IP From
IP Address
Mask
Click the Apply button to accept the changes made.
Click the Delete button to remove the specific entry.
Description
Enter the interface VLAN ID here. This value must be between 1 and 4094.
Figure 6-7 IPv4 Interface (Edit) Window
Description
Select to enable or disable the IPv4 interface global state.
Description
Select the get IP from option here. Options to choose from are Static and DHCP.
• When the Static option is selected, users can enter the IPv4 address of this
interface manually in the fields provided.
• When the DHCP option is selected, this interface will obtain IPv4 information
automatically from the DHCP server located on the local network.
Enter the primary IPv4 address for this interface here.
Enter the primary IPv4 subnet mask for this interface here.
128