Standard Ip Acl - D-Link DGS-1250 Series Reference Manual

DGS-1250 Series Gigabit Ethernet Smart Managed Switch Web UI Reference Guide
Parameter
ACL Name
Click the Apply button to accept the changes made.

Standard IP ACL

After selecting a Standard IP ACL and clicking the Add Rule button, the following page will appear.
The fields that can be configured are described below:
Parameter
Sequence No.
Action
Source
Destination
Description
• For a Standard IPv6 ACL, the range from 11000 to 12999.
• For an Extended IPv6 ACL, the range from 13000 to 14999.
• For an Extended MAC ACL, the range from 6000 to 7999.
Enter the name of the ACL here. This name can be up to 32 characters long.
Figure 8-11 Standard IP ACL (Add Rule) Window
Description
Enter the sequence number of this ACL rule here. The range is from 1 to 65535. If
this value is not specified, the system will automatically generate an ACL rule
number for this entry.
Select the action that this rule will take here. Options to choose from are Permit
and Deny.
Select and enter the source information here. Options to choose from are Any,
Host, IP, and Wildcard.
• When the Any option is selected, any source traffic will be evaluated
according to the conditions of this rule.
• When the Host option is selected, enter the source host IP address here.
• When the IP option is selected, the Wildcard option will also be available.
Enter the group of source IP addresses by using a wildcard bitmap. The bit
corresponding to the bit value 1 will be ignored. The bit corresponding to the
bit value 0 will be checked.
Select and enter the destination information here. Options to choose from are
Any, Host, IP, and Wildcard.
• When the Any option is selected, any destination traffic will be evaluated
according to the conditions of this rule.
• When the Host option is selected, enter the destination host IP address here.
• When the IP option is selected, the Wildcard option will also be available.
Enter the group of destination IP addresses by using a wildcard bitmap. The
bit corresponding to the bit value 1 will be ignored. The bit corresponding to
the bit value 0 will be checked.
162