Extended Ip Acl - D-Link DGS-1250 Series Reference Manual

DGS-1250 Series Gigabit Ethernet Smart Managed Switch Web UI Reference Guide
Parameter
Time Range
Click the Apply button to accept the changes made.
Click the Back button to discard the changes made and return to the previous page.

Extended IP ACL

After selecting an Extended IP ACL and clicking the Add Rule button, the following page will appear.
The fields that can be configured are described below:
Parameter
Sequence No.
Action
Protocol Type
Source
Description
Enter the name of the time range profile that will be used in this ACL rule here.
This name can be up to 32 characters long.
Figure 8-12 Extended IP ACL (Add Rule) Window
Description
Enter the sequence number of this ACL rule here. The range is from 1 to 65535. If
this value is not specified, the system will automatically generate an ACL rule
number for this entry.
Select the action that this rule will take here. Options to choose from are Permit
and Deny.
Select the protocol type option here. Options to choose from are TCP, UDP,
ICMP, EIGRP (88), ESP (50), GRE (47), IGMP (2), OSPF (89), PIM (103), VRRP
(112), IP-in-IP (94), PCP (108), Protocol ID, and None.
• Value - The protocol ID can also manually be entered here. The range is
from 0 to 255.
• Fragments - Select this option to include packet fragment filtering.
Select and enter the source IP information here. Options to choose from are Any,
Host, and IP.
163