Standard Ipv6 Acl - D-Link DGS-1250 Series Reference Manual

Gigabit ethernet smart managed switch web ui
Hide thumbs Also See for DGS-1250 Series:
Table of Contents

Advertisement

DGS-1250 Series Gigabit Ethernet Smart Managed Switch Web UI Reference Guide
Parameter
IP Precedence
ToS
DSCP
Time Range
Click the Apply button to accept the changes made.
Click the Back button to discard the changes made and return to the previous page.

Standard IPv6 ACL

After selecting a Standard IPv6 ACL and clicking the Add Rule button, the following page will appear.
The fields that can be configured are described below:
Parameter
Sequence No.
Action
Source
Description
This parameter is only available in the protocol type TCP.
Select the IP precedence value used here. Options to choose from are routine
(0), priority (1), immediate (2), flash (3), flash-override (4), critical (5), internet
(6), and network (7).
• Value - The IP precedence value can also manually be entered here. The
range is from 0 to 7.
Select the Type-of-Service (ToS) value that will be used here. Options to choose
from are normal (0), min-monetary-cost (1), max-reliability (2), max-
throughput (4), and min-delay (8).
• Value - The ToS value can also manually be entered here. The range is from
0 to 15.
Select the DSCP value that will be used here. Options to choose from are default
(0), af11 (10), af12 (12), af13 (14), af21 (18), af22 (20), af23 (22), af31 (26), af32
(28), af33 (30), af41 (34), af42 (36), af43 (38), cs1 (8), cs2 (16), cs3 (24), cs4
(32), cs5 (40), cs6 (48), cs7 (56), and ef (46).
• Value - The DSCP value can also manually be entered here. The range is
from 0 to 63.
Enter the name of the time range profile that will be used in this ACL rule here.
This name can be up to 32 characters long.
Figure 8-13 Standard IPv6 ACL (Add Rule) Window
Description
Enter the sequence number of this ACL rule here. The range is from 1 to 65535. If
this value is not specified, the system will automatically generate an ACL rule
number for this entry.
Select the action that this rule will take here. Options to choose from are Permit
and Deny.
Select and enter the source IPv6 information here. Options to choose from are
Any, Host, IPv6, and Prefix Length.
165

Advertisement

Table of Contents
loading

Table of Contents