D-Link DGS-1250 Series Reference Manual page 170

DGS-1250 Series Gigabit Ethernet Smart Managed Switch Web UI Reference Guide
After clicking the Edit button, the following page will appear.
After clicking the Edit button, the fields that can be configured are described below:
Parameter
Start Sequence No.
Step
Counter State
Remark
Click the Apply button to accept the changes made.
After clicking the Add ACL button, the following page will appear.
After clicking the Add ACL button, the fields that can be configured are described below:
Parameter
ACL Type
ID
Figure 8-9 ACL Access List (Edit) Window
Description
Enter the start sequence number here.
Enter the sequence number step here. The step range is from 1 to 32. This
specifies the number that the sequence numbers step. The default value is 10.
For example, if the increment (step) value is 5 and the beginning sequence
number is 20, the subsequent sequence numbers are 25, 30, 35, 40, and so on.
Select to enable or disable the counter state option here.
Enter an optional remark that will be associated with this ACL here.
Figure 8-10 ACL Access List (Add ACL) Window
Description
Select the ACL type that will be created here. Options to choose from are
Standard IP ACL, Extended IP ACL, Standard IPv6 ACL, Extended IPv6 ACL,
and Extended MAC ACL.
Enter the ID for the ACL here.
• For a Standard IP ACL, the range from 1 to 1999.
• For an Extended IP ACL, the range from 2000 to 3999.
161