Event Logging; Manage Network Services; Administration - Digi Connect Wi-SP User Manual

Digi Connect and ConnectPort TS Family web interface

Event logging

Management > Event Logging displays the event log for the Digi device. This log records events
throughout the Digi device's system, such as starting or resetting the Digi device, configuring features,
actions performed by various interfaces and subsystems, or starting applications. The event log is
always enabled and is not user-configurable. When the Digi device operates in an unexpected manner,
you can send the log entries to Digi for analysis by Technical Support and Engineers. You cannot
disable the event log. Digi uses the event log to get an accurate view of all operational aspects of the
device.
The event log is maintained in RAM, and there is no history across reboots of the device. When the log
"overflows" the oldest entries are overwritten with new ones, so the history is incomplete.
The Clear button clears the event log.

Manage network services

Management > Network Services displays information about active network services. Currently, the
only network-service management task possible from this page is managing the DHCP server.

Administration

You can periodically perform administration tasks on Digi Connect and ConnectPort TS Family
products, such as:
File management
n
Changing the password used for logging onto the device
n
Backing up and restoring device configurations
n
Updating firmware and Boot/POST code
n
Restoring the device configuration to factory defaults
n
Rebooting the device
n
The Administration section in the web interface provides the following options:
X.509 Certificate/Key Management: Load and manage X.509 certificates and public/private
n
host key pairs that are public key infrastructure (PKI) based security. See
Management
Note Only the ConnectPort TS 8/16 supports X.509 certificate/key Management.
File Management: Upload and manage files, such as custom web pages, applet files, and
n
initialization files. See
Python Program File Management: Upload custom programs in the Python programming
n
language to Digi devices and configuring the programs to execute automatically at startup. See
Python Configuration
Backup/Restore: Back up or restore device configuration settings. See
n
more information.
Update Firmware: Update the firmware, including Boot and POST code. See
n
for more information.
Digi Connect Family and ConnectPort TS Family
for more information.
File Management
for more information.
for more information.
Administration
X.509 Certificate/Key
Backup/Restore for
Update Firmware
97