Network Play - Sega AFTER BURNER CLIMAX Owner's Manual

7

NETWORK PLAY

• Linking machines should only be carried out by QUALIFIED SERVICE
PERSONNEL.
• Use care to ensure wiring is not damaged.
• Do not stress/over-bend the fibre optic cables, as this will affect their
performance.
•
•
•
•
•
•
•
•
• To prevent accidents and acts of vandalism, cover the network cables with
the
Up to 2 machines can be linked together for interactive play, allowing up to 2 players to play
simultaneously. Before linking be sure to check there is adequate power to supply 2 machines at once.
Also ensure power is OFF to all machines being linked.
Before starting to work, ensure that the power switch is OFF. Failure to
observe this can cause electric shock or short circuit.
Be careful not to damage the wires. Damaged wires may cause electric
shock or short circuit or present a fire risk.
Do not touch undesignated places. Touching places not designated can
cause electric shock or short circuit.
This work should be performed by the site maintenance individual or other
skilled professional. Performing work with non-technical personnel can
cause electric shock.
When linking a number of machines, be sure to supply sufficient power for
the corresponding number of machines. Be sure to secure per machine
current as stated in this manual. Failure to observe this can cause a fire
and an electric shock accident.
The distance between game machines is limited by the length of the
network cable used, but try to separate the machines as much as possible.
If the interval between them is too short, and if a customer should fall
down, there could be a head injury or other serious accident. The interval
shown in the illustration in this manual assumes that optional items have
been attached.
Do not work in areas where there are inclines, level differences, grooves,
etc. Otherwise workers could stumble and fall or suffer other serious
accident. Also, work cannot be performed properly.
To perform work safely, be sure to secure the space corresponding to
number of machines to be linked. Failure to observe this can cause
accident.
To avoid accidents, use a cable cover that will not cause patrons to trip
when laying network cables in areas of heavy foot traffic.
strongest cover possible.
75