4) The grip L microswitch is inserted. Pull out the microswitch slowly so as not to damage wire
5) Use a soldering iron to remove wire to be connected by solder to microswitch pin.
6) Solder wire to the pin of the new microswitch.
7) Insert microswitch into grip L, then attach grip L
8) Attach grip R and fasten it with 3 screws, being careful not to let wire get caught anywhere. Coat
the screws with screw lock agent at this time. Also be careful not to tighten the screws excessively.
9) Engage the power. Note that initialization takes place
10) Check gun trigger input on the game test mode input test screen
31