Sega AFTER BURNER CLIMAX Owner's Manual page 37

5) Tighten the 2 loosened screws.
6) Turn on the power. Note that initialization takes place.
7) Check the volume value on the game test mode input test screen. (See 9-3a.) Confirm that
changes take place smoothly in accordance with lever operation. Also confirm that the value when
hand has been removed from the lever is [80H+/-4H].
8) Align the center position of throttle lever on the calibration screen.
9) Simply changing the setting on the calibration screen will not be effective. Terminate the test mode.
Note that initialization takes place when the test mode is terminated.
REPLACEMENT METHOD
Make available the volume for replacement and 3 thermal contraction tubes (PART NO. 310-5029-D20).
1) Cut off the power supply.
2) Take out the 4 truss screws and remove the throttle cover lower.
3) Unfasten the 2 cord clamps that hold down wire connected to the volume.
4) Remove the connector.
36