Installation And Service Instructions; Handling And Installation Precautions; Coin Handling - Sega AFTER BURNER CLIMAX Owner's Manual

3

INSTALLATION AND SERVICE INSTRUCTIONS

• Installation and commissioning should only be carried out by QUALIFIED
SERVICE PERSONNEL.

3.1 HANDLING AND INSTALLATION PRECAUTIONS

When installing or inspecting the machine, be very careful of the following points and pay attention to
ensure that the player can enjoy the game safely.
The game must NOT be installed under the following conditions:
• Outside, the game is designed for indoor use only.
• In areas directly exposed to sunlight, high humidity, dust, excessive heat or extreme cold.
• In locations that would present an obstacle in the case of an emergency i.e. near fire equipment or
emergency exits.
• On unstable surfaces or surfaces subject to vibration.
• Where liquids, other than routine cleaning (do not use water jet), may come into contact with the game.
Important:
• This machine should only be installed by Qualified Service Personnel.
• Be sure to switch the supply power OFF and remove the mains supply plug from the machine before
any work is carried out on the machine.
• Do not attempt to repair the PCB's (Printed Circuit Boards) yourself. This will void the warranty. The
PCB's contain static sensitive devices that could be damaged.
• Always return a faulty part to your distributor with adequate packaging and protection.
• When removing the plug from the mains always grasp the plug not the cable.
• Do not use a fuse that does not meet the specified rating.
• Make sure all connections are secure before applying power.
• Do not clean using a pressure washer.
•
Ensure that the mains lead is not damaged. If the mains lead is damaged in any
way there could be a danger of electric shock or a fire hazard.
•
Ensure that the power supply is fitted with circuit protection. Using the power
supply without circuit protection is a fire hazard.

3.2 COIN HANDLING

Standard Sega machines are fitted with a C120 coin mechanism, however, as a service to our customers
Sega machines can be supplied with no coin mechanism or door allowing the customer to fit a coin
handling option from the approved list. Fit only the coin handling arrangements detailed below and follow
the instructions provided. Failure to fit the coin handling options detailed or failure to follow the installation
instructions will render the machine, under the CE marking directive, void.
Approved coin handling options:
• Money Controls C220 / SR3
• Generic mechanical
• Mars (MS111B1 and ME115)
• SECI RM4-G20
6