e-2-2) THROTTLE LEVER
● STEP 1
[THROTTLE LEVER (STEP1) Screen]
(test_calibrate_throttle_1.jpg)
STEP 1 aligns the center position for the Throttle Lever.
Press the TEST Button after releasing your hand from the Throttle Lever.
After determining the center position, proceed to STEP 2.
● STEP 2
[THROTTLE LEVER (STEP2-1) Screen]
[THROTTLE LEVER (STEP2-2) Screen]
(test_calibrate_throttle_2.jpg)
(test_calibrate_throttle_3.jpg)
STEP 2 aligns the MIN/MAX positions for the Throttle Lever.
Push the Throttle Lever as far as possible in both directions (forward/back).
NOTE: Make sure that you do not push the lever into CLIMAX Mode when inputting the MAX value. If you do so the
game cannot be played properly.
(After moving it past a certain position, the message "PRESS TEST BUTTON TO EXIT" will be displayed.)
Then, press the TEST Button to set these MIN/MAX settings and return to the CALIBRATION SELECT Screen.
70