Wiring Connections - Sega AFTER BURNER CLIMAX Owner's Manual

3.5.3.1 WIRING CONNECTIONS.

COIN MECH LOOM
C220B LM1006IDC
LM1006LAMP-0.1
GENERIC LM1008
MECHANICAL
LM1008-LAMP
S
MARS LM1007
MS111B1
LM1008-LAMP
MARS ME115
SECI, C120 OWN LOOM AND
LM1006LAMP-0.1
INSTALLATION
• Attach the lamp holder to the bracket on the coin return
button.
• Attach one 15-way connector to the C220 coin mech.
• Attach the other 15-way connector to Validator A on the
credit board.
• Attach the 2-way connector to 'LAMP' on the VTS
board.
• Fit the two lamp holders behind the coin return buttons.
• Attach the blue cable and orange cable to one mech's
microswitch switch.
• Attach the blue/green cable and orange/green cable to
the other mech's microswitch.
• Attach the 2-way mate and lok plug to the 2-way mate
and lok cap provided.
• Attach one 15-way connector to Validator A and the
other to Validator B on the credit board
• Fit the lamp holder to the bracket behind the coin return
button.
• Fit one of the 13-way connectors to the coin mech.
• Fit the other 13-way connector to Validator A on the
credit board. Note the 13-way connector is keyed and
this key must coincide with the key on the credit board.
• Attach the lamp holder to the bracket on the coin return
button.
• Attach the 2- connector to 'LAMP' on the VTS board.
• Attach the validator's own loom to position A on the
credit board
VTS credit board assembly
15