Sega AFTER BURNER CLIMAX Owner's Manual page 72

e-2-3) SEAT CENTER POSITION
[!] CAUTION
On this screen Sensor checks will not be performed, and the seat will also be unlocked.
Make sure that no one is standing too close and take due care when performing the
test.
[SEAT CENTER POSITION Screen]
This screen allows you to adjust the seat's center position.
Procedure
1. Move the seat by hand into the center position.
2. Align this volume value with the CENTER value. （ADD / SUB）.
These two values must match.
<0> will display how much the value has been changed from the initial 80H.
This value can vary from – 32 to +32.
3. Leave TEST Mode and the center position will be changed.
To make a selection
Use the SERVICE Button to highlight the item you wish to set.
Press the TEST Button to perform the highlighted item.
(You can also use the Control Stick and Trigger to make selections in GAME TEST Mode.)
Menu Explanation
ADD
SUB
EXIT
(test_calibrate_seat.jpg)
80H ( 80H ) < 0>
↑ ↑
Add 1 to the CENTER position value.
Subtract 1 from the CENTER position value.
Return to CALIBRATION SELECT Screen.
71