Fuses - Sega AFTER BURNER CLIMAX Owner's Manual

See INSTALLING THE BILLBOARD earlier in this manual for instruction.

3.7 FUSES

• Never touch places other than those specified. Touching places other than those
specified can cause electric shock and short circuit. Disconnect the machine from
the supply before attempting the replacement of any fuse.
• FUSES should only be replaced by QUALIFIED SERVICE PERSONNEL.
There are a number of fuses used on this machine to protect the user and the machine from damage. Only
replace the fuse once you have removed the cause of its failure. Detailed below is a list of the fuses used,
their location and if relevant PCB reference:
PART NUMBER LOCATION
514-5078-6300 838-14515-A0191
514-5078-5000 ABX-0400UK
514-5079-10000 560-LBGH-01UK
514-5078-6300 838-14551-02
514-5033-6300 400-5421-15024
514-5033-3000 400-5421-03012
There are also fuses located on the Monitor PCB. Refer to the relevant Monitor manual supplied to
reference these fuses.
TYPE & DETAILS
6.3A T CERAMIC 20MM
5A T CERAMIC 20MM
10A T CERAMIC 32MM
6.3A T CERAMIC 20MM
6.3A T GLASS 20MM
3A T GLASS 20MM
20
When transporting the
product up or down
steps, etc, disassemble
the machine as shown.
Remove the Billboard if
height is restricted (see
following page for
details).
QTY PER COCKPIT
2
1
1
2
1
1