Assembly Check - Sega AFTER BURNER CLIMAX Owner's Manual

3.5.5 ASSEMBLY CHECK

• This operation should only be carried out by QUALIFIED SERVICE
PERSONNEL.
In the TEST mode ensure the assembly has been made correctly by performing the following checks.
Use test mode to confirm that assembly is proper, and that the LINDBERGH, connecting boards, and
input/output devices are normal.
Perform the following tests in test mode.
For tests (1) to (4), refer to the LINDBERGH service manual. For tests (5) to (7), see [9-3 Game Test
Mode].
The items displayed on the test screen for tests (5) and (6) vary depending on the setting for cabinet type in
the game setting screen.
(1) Information Display Screen
When "SYSTEM INFORMATION," "STORAGE INFORMATION," or "JVS TEST" has been selected on the
system test mode menu, system information, game information and information on JVS I/O board
connected to LINDBERGH are displayed.
If each category of information is displayed without anomalies, the LINDBERGH is normal.
(2) JVS Input Test Screen
When "INPUT TEST" has been selected on the JVS test screen, data input to the JVS I/O board is
displayed. On the product, this is the screen for the testing coin switch.
Insert a coin. If the display to the side of the switch changes the switch and wiring connections are normal.
(3) Monitor Test Screen
When "MONITOR TEST" has been selected on the system test mode menu, the screen for checking
monitor adjustment status appears.
Monitor adjustment is completed when the product is shipped from the factory, but you should observe the
test screen to determine whether further adjustment is necessary. Refer to Chapter 10 and adjust the
monitor if necessary.
(4) Speaker Test Screen
When "SPEAKER TEST" has been selected on the system test mode menu, the screen for checking
speaker sound output appears.
To confirm that audio output is normal, have test sound output from the game unit's speaker.
(5) Input Test
When "INPUT TEST" has been selected on the game test mode menu, the screen for testing input device
appears. Test operate the input device by pressing each switch. If the display on the side of each input
device changes to "ON" and numerical values change smoothly in accordance with each operation, the
input device and its wiring connections are normal.
17