Guide Plate Replacement - Sega AFTER BURNER CLIMAX Owner's Manual

4.1.5 GUIDE PLATE REPLACEMENT

Among the potential causes of abnormal control stick operability, apart from volume malfunctions, are wear
and/or damage to guide plates.
Use the following tools to replace a guide plate.
- 2.5 mm Allen wrench or screwdriver
-4 mm Allen wrench or screwdriver
1) Cut off the power and open the controller lid at the bottom of the control stick.
2) Take out 4 hexagon socket screws that hold down the guide plate, then replace the guide plate
32