Gameboard; Removing The Board - Sega AFTER BURNER CLIMAX Owner's Manual

4.7 GAMEBOARD

• Turn off the mains power and remove the power cord before opening the
machine.
• The GAME BOARD should not require any work to be carried out upon it. All
settings and tests can be achieved without access to the GAME BOARD.
• All work to be carried out by QUALIFIED SERVICE PERSONNEL

4.7.1 REMOVING THE BOARD

To return the game board for servicing, take out the board using the following procedure.
1. Turn the main switch OFF.
2. Unlock the base and remove the 2 M6 bolts.
3. Tip the seat carefully backwards as shown. Be careful not to damage the seat back when resting it on
the floor. Use a protective mat under the seat back to protect it on hard floors.
4. Disconnect all connectors from the game board, remove the four screws securing the game board to the
wooden base and lift it out. Do not attempt to service the game board. THERE ARE NO USER
SERVICABLE PARTS INSIDE! Return the game board to the Service Department inside the special
packaging provided.
47