Juniper SRX100 Hardware Manual page 116

SRX100 Services Gateway Hardware Guide
Varoitus Lue asennusohjeet ennen järjestelmän yhdistämistä virtalähteeseen.
Attention Avant de brancher le système sur la source d'alimentation, consulter les
directives d'installation.
Warnung Lesen Sie die Installationsanweisungen, bevor Sie das System an die
Stromquelle anschließen.
Avvertenza Consultare le istruzioni di installazione prima di collegare il sistema
all'alimentatore.
Advarsel Les installasjonsinstruksjonene før systemet kobles til strømkilden.
Aviso Leia as instruções de instalação antes de ligar o sistema à sua fonte de energia.
¡Atención! Ver las instrucciones de instalación antes de conectar el sistema a la red
de alimentación.
Varning! Läs installationsanvisningarna innan du kopplar systemet till dess
strömförsörjningsenhet.
Rack-Mounting Requirements and Warnings
Ensure that the equipment rack into which the services gateway is installed is evenly
and securely supported to avoid the hazardous condition that could result from
uneven mechanical loading.
WARNING: To prevent bodily injury when mounting or servicing the services gateway
in a rack, take the following precautions to ensure that the system remains stable.
The following directives help maintain your safety:
Waarschuwing Om lichamelijk letsel te voorkomen wanneer u dit toestel in een rek
monteert of het daar een servicebeurt geeft, moet u speciale voorzorgsmaatregelen
nemen om ervoor te zorgen dat het toestel stabiel blijft. De onderstaande richtlijnen
worden verstrekt om uw veiligheid te verzekeren:
98
SRX100 Services Gateway Installation Safety Guidelines and Warnings
The services gateway must be installed into a rack that is secured to the building
structure.
The services gateway should be mounted at the bottom of the rack if it is the
only unit in the rack.
When mounting the services gateway in a partially filled rack, load the rack from
the bottom to the top with the heaviest component at the bottom of the rack.
If the rack is provided with stabilizing devices, install the stabilizers before
mounting or servicing the services gateway in the rack.