Preparing The Srx100 Services Gateway For Desk-Mount Installation; Preparing The Srx100 Services Gateway For Wall-Mount Installation - Juniper SRX100 Hardware Manual

SRX100 Services Gateway Hardware Guide
NOTE: The rack-mounting kit is not shipped with the device and must be ordered
separately.
Related Topics

Preparing the SRX100 Services Gateway for Desk-Mount Installation

You can mount an SRX100 Services Gateway on a desk or other level surface
horizontally or vertically. The four rubber feet attached to the chassis provide stability.
Before mounting an SRX100 Services Gateway on a desk or other level surface:
NOTE: The vertical desk-mounting kit is not shipped with the device and must be
ordered separately.
Related Topics
36
Preparing the SRX100 Services Gateway for Desk-Mount Installation
Site Preparation Checklist for the SRX100 Services Gateway on page 17
Unpacking the SRX100 Services Gateway on page 31
Clearance Requirements for Airflow and Hardware Maintenance of the SRX100
Services Gateway on page 22
SRX100 Services Gateway Rack Requirements on page 21
Preparing the SRX100 Services Gateway for Desk-Mount Installation on page 36
Preparing the SRX100 Services Gateway for Wall-Mount Installation on page 37
Verify that the site meets the requirements described in "Site Preparation
Checklist for the SRX100 Services Gateway" on page 17.
Place the desk in its permanent location, allowing adequate clearance for airflow
and maintenance, and secure it to the building structure.
Remove the services gateway chassis from the shipping carton. For unpacking
instructions, see "Unpacking the SRX100 Services Gateway" on page 31.
If you are mounting the device vertically on the desk, make sure that the following
parts are available in your vertical desk-mounting kit for the SRX100 Services
Gateway:
Vertical stand
Screws
Site Preparation Checklist for the SRX100 Services Gateway on page 17
Unpacking the SRX100 Services Gateway on page 31
Clearance Requirements for Airflow and Hardware Maintenance of the SRX100
Services Gateway on page 22
Preparing the SRX100 Services Gateway for Rack-Mount Installation on page 35
Preparing the SRX100 Services Gateway for Wall-Mount Installation on page 37