Components - Juniper SRX100 Hardware Manual

Chapter 13
Maintaining the SRX100 Services
Gateway Hardware Components
Maintaining the SRX100 Services Gateway Hardware Components
Table 27: Maintenance Procedures for the SRX100 Services Gateway Hardware Components
Maintenance Procedures
Routine maintenance
Maintaining the power
supply
Related Topics
This chapter describes how to maintain the hardware components of the SRX100
Services Gateway. This chapter includes the following section:
Maintaining the SRX100 Services Gateway Hardware Components on page 77
Table 27 on page 77 describes the common tasks for maintaining the hardware
components of the services gateway.
Description
For optimum performance of the services gateway, you should regularly perform the following
preventive maintenance procedures :
Inspect the installation site for moisture, loose wires or cables, and excessive dust.
Make sure that airflow is unobstructed around the device and into the air intake vents.
To maintain the power supply on the services gateway:
Make sure that the power and grounding cables are arranged so that they do not obstruct
access to other device components.
Periodically inspect the site to ensure that the grounding and power cables connected to
the device are securely in place and that there is no moisture accumulating near the device.
CAUTION: We recommend using a surge protector for the power connection.
Site Preparation Checklist for the SRX100 Services Gateway on page 17
Monitoring the SRX100 Services Gateway Chassis Using the CLI on page 79
Monitoring the SRX100 Services Gateway Components Using LEDs on page 81
Monitoring the SRX100 Services Gateway Using Chassis Alarm Conditions on
page 83
Monitoring the SRX100 Services Gateway Power System on page 84
Maintaining the SRX100 Services Gateway Hardware Components
77