Juniper SRX100 Hardware Manual page 28

SRX100 Services Gateway Hardware Guide
CAUTION: Pressing and holding the Reset Config button for 15 seconds or more
deletes all configurations on the device and loads and commits the factory
configuration.
Related Topics
SRX100 Services Gateway LEDs
This topic includes the following sections:
SRX100 Services Gateway Front Panel LEDs
Figure 4 on page 10 illustrates the front panel LEDs of the SRX100 Services Gateway.
NOTE: The numbers in Figure 4 on page 10 correspond to the numbers in Table 8
on page 11
Figure 4: SRX100 Services Gateway Front Panel LEDs
Table 8 on page 11 lists the LED indicators on the SRX100 Services Gateway front
panel.
10
SRX100 Services Gateway LEDs
SRX100 Services Gateway Specifications on page 5
SRX100 Services Gateway Front Panel and Back Panel Views on page 6
SRX100 Services Gateway LEDs on page 10
SRX100 Services Gateway Boot Devices on page 13
SRX100 Services Gateway Power Supply on page 13
SRX100 Services Gateway Front Panel LEDs on page 10
SRX100 Services Gateway Ethernet Port LEDs on page 12