Furuno FAR-2107 Series Service Manual page 288

3. Batch file
SPU board: 0359204-02.xx
- uparpa.bat
uppg /lf ldarpa.bin /hf arparom.hex /port 1 /sp 9600 /t 9999
- updraw.bat
uppg /lf lddraw.bin /hf drawrom.hex /port 1 /sp 9600 /t 9999
- upmain.bat
uppg /lf ldmain.bin /hf fr2107r.hex /port 1 /sp 9600 /t 999999999
Correspond to C-MAP
uppg /lf ldmain.bin /hf fr2107rc.hex /port 1 /sp 9600 /t 999999999
- upfpga.bat
uppg /lf ldfpga.bin /hf fpgarom.hex /port 1 /sp 9600 /t 9999
RFC board: 0359202-01.xx
- upｒｆｃ.bat
uppg /lf uprfc.txt /hf fr2107rf.bin /port 1 /cpu 1 /sp 9600 /t 999999999
4. How to recognize Ver-22 and after of SPU board.
A screw is added for
fixing.
Fig 5.1.1 SPU Board Ver-22
5-2
"Ver" is displayed under
the NET-100 board.
The connector of 8 pin is added.
5.1 Overview