Furuno FAR-2107 Series Service Manual page 159

Supplied Power
JP5
JP2
(Stator Voltage)
JP3
(Rotor Voltage)
J1
(Type of gyrocompass)
F1-4 (2 A Fuse)
(S1-S3/R1 COM)
J5
(Rotor Signal Input)
J4 (Stator Signal Input)
R42 (+5.2 V ADJ, TP1)
JP4
CR21 (CPU RUN,
OK when blinking)
Fig. 2.5.7 GC-10 Board (64P1106A)
CR22 (+5.2 V)
JP8: BATT Backup
TP1:+5.2V
J6
(NMEA Output Port)
2-43
2.5 Optional Unit
SW3 (Baud Rate, Version and Talker)
SW1
(Gear ratio, Type of
gyrocompass and
frequency)
JP9
SW2
(Rotor Voltage, Stator
Voltage, Self-test,
NMEA Transmitting
interval, CPU reset)
JP6/7 (AD Output Interval,
J7-12:
Data Output Port 1-6
J7, J8, J9 (25 ms)
J10, J11, J12 (200 ms)
25 ms/200 ms)