Arp Preset - Furuno FAR-2107 Series Service Manual

4.4.12 ARP PRESET

INITIALIZE -> 6
1. Setting of TTM OUTPUT
Specifies the ARPA output data among the "OFF/REL/TRUE". The output port is
selected in "[INITIALIZE] -> 8 -> 5: INS"
- [J619]: ECDIS
- [J620]: TRACK CONTROL
- [NETWORK]: LAN
See page. 4-38 for details.
2. Setting of ARP PRESET
Basically there is no need for changing the default values in "ARP PRESET" -> 3, 4, 5,
6, 7 and 8 menus.
When restoring the setting of "6: ARPA PRESET" menu for the default setting, select
[Menu] -> 0 -> 6 -> "0. DEFAULT" and click the left button of the track ball 3 times.
3. [ARPA SENSOR DATA]
This is a function for monitoring ARPA status.
Fig. 4.4.12 Display of ARPA SENSOR DATA (1/2) and (2/2)
4-31
Initialize Setting Initialize Setting Initialize Setting Initialize Setting
4.4
ARPA data for
manufactural engineers