Furuno FAR-2107 Series Service Manual page 113

Function
Two times zoom/Three times zoom
Zoom
Screen fixed/GND fixed/Target tracking
Brightness 100 steps
Panel brightness 16 steps
Range scale nm/km/sm/kyd
Range and bearing Relative/Range and bearing
+ Cursor
True/LL/X-Y/Fishing ground
Watch alarm IN/OUT
The pulse width determined by the selected
Pulse length
Range.
2nd Sweep Echo Reject OFF/ON
Blind sector setting
Maximum angle 135°in two areas
Presentation mode HU/HU-TB/CU/NU/TM
Display mode Radar/Rader + Plotter/Plotter
Off Center OFF/ON
Two VRMs
VRM
Two EBLs
EBL
Heading line Erased only while pressing the [HL OFF] key.
Stern line Erased only while pressing the [HL OFF] key.
Range ring Erased only while pressing the [HL OFF] key.
Index line The bearing and range can be set.
OFF/ON
Own ship symbol Ship length, ship width, Rader and GPS antenna
position set in the INITIALIZE menu.
BRILL BRILL1>BRILL2>BRILL3>BRILL4
Description
** Unit of distance: nm/km/sm/kyd**
** Relative/true (Only True except for HU
and HU-TB modes) **
Table 1.4.1 (2/5) List of Functions
Zoomed area is marked by a box.
Adjusted by the encoder.
IMO, A type: nm
Brightness in 16 steps.
B/C type only
Desired position within 75% of
radius.
- Distance is continuously
changeable.
- Mark brightness in 16 steps
- IMO, A type: nm
- Bearing is continuously
changeable.
- Mark brightness in 16 steps
Mark brightness in 16 steps
Mark brightness in 16 steps
Mark brightness in 16 steps
Mark brightness in 16 steps
Mark brightness in 16 steps
Settable items:
ECHO COLOR/BKGD COLOR/
CHARACTER/CURSOR/ECHO/
TRAIL/HL/RING/
BEARING CURSOR/EBL/
VRM/INDEX LINE/
ARPA SYMBOL/
AIS SYMBOL/
LL GRID/MARK/CHART/
PANEL DIMMER
1-21
1.4 List of Functions
Remarks