Furuno FAR-2107 Series Service Manual page 230

Differences in Functions
Range
Handling of chart
NAV data
When handling DTM
Sentence error
When handling AIS
display, there is no DTM
sentence error.
EPFS error display when
GPS accuracy is changed.
Range of Alarm Zone
Cursor data box
Type
IMO, A 0.125/0.25/0.5/0.75/1.5/3/6/12/24/48/96
B, C 0.125/0.25/0.5/0.75/1.5/3/4/6/8/12/16/24/32/48/96
IMO, A Rader/Rader+Plotter
B, C Rader/Plotter/Rader+Plotter
nd
IMO IEC61162 2
A, B, C IEC61162
DATUM error is displayed when there is no DTM (WSG-84)
IMO
sentence.
DATUM error is not displayed even when there is no DTM sentence.
A, B, C However, when DTM data is discontinued, DATUM error is
displayed.
When DTM is WGS-84, ON/OFF of "[Menu]->4->8:
IMO AIS FUNCTION" is enabled. When DTM is other than WGS-84, AIS
function is turned off.
A, B, C No restriction
IMO EPFS error is displayed.
A, B, C EPFS error is not displayed.
ALARM 1 is set in a range of 3 to 6 NM. There is no restriction on
IMO
the range of ALARM 2.
A, B, C There is no restriction either on ALARM 1 and ALARM 2.
IMO, A One (1)
When "3: SET DRIFT" is set to OFF in the [SPD] icon menu, one
B, C
more cursor data box is added.
4-27
Table 4.4.6 Functions for Radar Type
Functions
ED NMEA Ver-3.0 (Equivalent)
NMEA Ver-1.5 (Equivalent)
Initialize Setting Initialize Setting
Initialize Setting Initialize Setting
4.4