Furuno FAR-2107 Series Service Manual page 190

[CARD2/2]
1 BACK
6 CARD 2 [FILE DELETE]
3 [CARD INITIALIZE]
1 BACK
2 DEPT
3 DEPTH GRAPH SCALE
4 DEPTH MARK
5 CURRENT
6 WIND
7 TEMP
7 NAV DATA
8 DATE-TIME
9 LOCAL TIME ADJ
0 WPT DATA
[NAV LINE WPT 1/2]
1 BACK
2 NAV LINE DATA
3 NAV LINE SELECT
4 SKIP NEXT WPT
5 NAV LINE WIDE
8 NAV LINE
WPT
6 [WPT SET]
7 [WPT LIST]
8 [NAV LINE SET]
9 [NAV LINE LIST]
Cont'd
Deletes a selected file stored on the RAM card.
Initializes the RAM card.
Allows displaying the following data in the data box. To
display them, turn on the setting in [Menu] -> 9 -> 2 -> 3:
NAV DATA.
- DEPTH: DPT>DBT>DBS
- CURRENT: VDR
- WIND: MWV>VWT>VWR
- TEMP: MTW
- DATE & TIME: ZDA
- WPT DATA: Selects whether to display the WPT in
the relative bearing or true bearing.
Note:
To display the NAV data, turn on the setting in [Menu] ->
9 -> 2 -> 3:NAV DATA.
Displays the navigation line received from external
equipment or from registered by the radar.
Selects the Navigation line to be displayed.
Skips the next waypoint in the navigation waypoints.
Allows the setting of the navigation line width.
Allows registering waypoint up to 200 points.
For registering waypoints, the cursor (+) or L/L are used.
A registered waypoint is also deleted in this box.
Displays the list of registered waypoints.
Allows the setting of the navigation line based on the
registered waypoints.
Up to 30 navigation lines can be registered. A registered
navigation line is also deleted in this box.
Displays the list of registered navigation lines.
3-25
3.3 Main Menu Tree