Seat Back Reclining; Cunshion Strength Adjustment - Zetor HORTUS HS Series Operator's Manual

Seat Back Reclining

To change the seatback angle, raise the lever on the left of the seat.
Then, adjust the seatback angle with the lever pulled. Release the lever after adjustment . Make sure that the
lever is returned and the seat is firmly fixed after adjustment.
1 - Seat belt
2 - Backrest angle adjustment lever

Cunshion Strength Adjustment

The seat cushion can be adjusted according to the weight of the driver.
Turning the cushion adjustment lever counterclockwise to the 50 kg position makes the cushion lighter, and
turning the lever clockwise to the 130 kg position makes the cushion heavier.
1 - Seat Belt
2 - Knob for weight adjustment
18
GENERAL INFORMATION
HODP008
HODP009