CONTROLS, INSTRUMENTS & OPERATIONS
Gap adjustment
Adjusting the brakes
1 - Free play
As is the case with the clutch, use of the brakes will
change the pedal free play and the balance between the
right and left pedal.
The correct pedal free play is 1.18~1.57 in. (30~40 mm).
U18N091
Adjusting method
Loosen the double locknuts to adjust the brake.
Turning it to increases the free play, or decreases it.
Tighten the double locknuts and confirm to fix the Nuts.
Check that the free play is correct and the same on both
pedals to ensure even braking.
UCL18N074
Caution: Uneven adjustment of the left and right pedal will result in one sided braking when
the pedals are connected and can cause serious accidents, especially at high speeds.
Double check to ensure free play is the same on both pedals.
Adjusting the throttle lever
If this lever is either loose or difficult to move please consult your dealer for rectification of the problem.
Adjusting toe-in
If the toe-in adjustment is incorrect it can cause severe shaking of both the steering wheel and the entire
tractor.
The correct toe in is 0.08~0.24in. (2~6mm) We recommend that this adjustment is made by the dealer.
97