Avaya J169 Installing And Administering page 143

Category
TIA LLDP MED
TIA LLDP MED
Avaya Proprietary
Avaya Proprietary
Avaya Proprietary
Avaya Proprietary
Avaya Proprietary
Basic Mandatory
On receipt of a LLDPDU message, the phones will act on the TLV elements described in the
following table:
Table 11: Impact of TLVs Received by System Parameter Values
System Parameter
Name
PHY2VLAN
L2QVLAN and L2Q
May 2018
TLV Name (Type)
Inventory – Manufacturer
Name
Inventory – Model Name
PoE Conservation Level
Support
Call Server IP Address
IP Phone Addresses
File Server
802.1Q Framing
End-of-LLDPDU
TLV Name Impact
IEEE 802.1 Port The value is changed to the Port VLAN identifier in the
VLAN ID TLV.
IEEE 802.1 VLAN The value is changed to the TLV VLAN Identifier. L2Q will
Name be set to 1 (ON). VLAN Name TLV is only effective if the
following conditions are met:
• The phone is not registered with the call server.
• Name begins with VOICE (letters are not case-
• The VLAN is not zero.
• DHCP Client is activated.
• The phone is registered but is not tagging layer 2 frames
If VLAN Name causes the phone to change VLAN and the
phone already has an IP Address the phone will release
the IP Address and reset.
Installing and Administering Avaya J169/J179 IP Phone H.323
Comments on this document? infodev@avaya.com
Administering Deskphone Options
TLV Info String (Value)
Avaya.
MODEL with the final D xxx characters removed.
Provides power conservation abilities and settings,
Typical and Maximum Power values.
OUI = 00-40-0D (hex), Subtype = 1.
Call Server IP address.
Subtype = 3.
Phone IP address, Phone address mask, Gateway IP
address.
Subtype = 4.
File Server IP address.
Subtype = 6.
802.1Q Framing = 1 if tagging or 2 if not.
Subtype = 7.
Not applicable.
sensitive).
with a non-zero VLAN ID.
Table continues...
143