Avaya J169 Installing And Administering page 125

Parameter name
QTESTRESPONDER
RECORDINGTONE
RECORDINGTONE_INTER
VAL
RECORDINGTONE_VOLU
ME
REREGISTER
REUSETIME
RFSNAME
RINGBKFEATURES
RINGTONESTYLE
RTCPMON
May 2018
Default value Description and value range
" " (Null) Specifies the IP address to which Qtest messages should
be sent. The device at this address must support the
echo service on UDP port 7, as specified in IETF RFC
862. Format is dotted decimal, colon-hex, or DNS format,
separated by commas, with no spaces. Zero to 255 ASCII
characters, including commas.
0 Recording tone permission flag. (0=Recording tone is
disabled, 1= Recording tone is enabled).
When recording tone is enabled, when the agent is on an
active call or conference call, the deskphone inserts a
tone into the audio stream every 15 seconds, so that both
the user and the far end hears it. The recording tone has
a frequency of 1400 Hz and a duration of 0.2 seconds.
15 Recording tone interval. The number of seconds between
recording tones, with a range from 1 to 60.
0 Volume of Recording tone played. (1 or 2 ASCII digits
from '0' to '10'). The default plays the Recording tone at
the same volume as the rest of the audio path; each
higher number reduces the volume by 5 db.
20 Registration timer in minutes. Controls an H.323 protocol
timer that should only be changed under very special
circumstances by someone who fully understands the
system operation impact. Value is 1-120.
60 The number of seconds to wait for successful completion
of DHCP before reusing previous parameters on the
default (port) VLAN. Valid values are 1 to 3 ASCII
numeric digits, 0 and 20 through 999.
" " (Null) Applies only to deskphones running software Release 6.0
and later. The file name of the Signed Kernel/Root
Software Package that should be downloaded and
installed by the deskphone during power-up or reset if it
has not already been downloaded and installed. This
parameter should only be set in an upgrade file.
" " (Null) A list of feature number identifiers for softkey features
potentially available in the active with far end ringback
call state.
Zero to 255 ASCII characters consisting of zero to three
whole numbers separated by commas without any
intervening spaces.
0 The Ring Tone Style Menu initially offered to the user ,
0=Classic; 1=Alternate, more modern ringtones.
" " (Null) Text string containing the 4-octet IP address of the RTCP
monitor currently in use, in dotted decimal or DNS Name
format (0-15 ASCII characters, no spaces).
Installing and Administering Avaya J169/J179 IP Phone H.323
Comments on this document? infodev@avaya.com
Administering Deskphone Options
Table continues...
125