Wall Mounting Avaya J100 Series Ip Phones - Avaya J169 Installing And Administering

Initial setup and connectivity
Diagram: Phone deployment process
Collect configuration data for the following components
File Server
Deskphone
User, Session &
Communication Profile
DHCP Server
5
Connect IP Phone
Related links
Diagram: IP phone setup

Wall mounting Avaya J100 Series IP Phones

About this task
Wall mounting kit and procedure of Avaya J100 Series IP Phones are similar except the wall
mounting bracket. Wall mounting brackets look different for Avaya J169/J179 IP Phone and Avaya
J129 IP Phone. You can order the kit separately, using the part numbers that correspond to the
phone.model. For example, the part number of the wall mount bracket is 700512707. The
procedure describes the wall mounting procedure with illustrations as reference.
Before you begin
Get the following items:
• Wall mounting kit that contains a wall mount bracket, and an Ethernet cable.
• Four #8 screws. The screws are not provided with the wall mounting kit.
May 2018
1
Configure the servers
File Server
Network Server /
Switch (LLDP)
DHCP NTP
NTP Server
to the network
on page 21
Installing and Administering Avaya J169/J179 IP Phone H.323
Comments on this document? infodev@avaya.com
Configure the following servers
Network Server /
DHCP Server
Switch (LLDP)
File Server
File Server
4
Unpack and assemble
2
User, Session &
Communication Profile
DHCP
NTP
NTP Server
3
Configure security
certificates
22