Local Administrative Craft Procedures Menu - Avaya J169 Installing And Administering

Initial setup and connectivity
this character is entered, the telephone examines the contents of the first field to ensure
consistency with the field boundary. That is the absence of hex characters, and at most three
characters of value 255 or less, in the first field if the field boundary is a decimal point. If the first
field contains any content inappropriate for the entered field boundary, an error beep is generated.
You cannot enter more content until the contradiction in the text string is deleted, meaning either
the field boundary is deleted or the cursor is moved back and the field contents edited). After you
enter content that identifies the format of the IP address appropriate to IPv4 or IPv6, the rest of the
address entry conforms to that format.

Local administrative Craft procedures menu

Using the administrative procedures, you can customize the IP deskphone installation for your
specific operating environment. This section provides a description of each local administrative
option covered in this guide, with references to the pages on which the option appears.
Note:
You should press a line key to select a line. Depending upon the privileges assigned to the
user by administrator, an end user can view but cannot change most of the parameters
associated with Craft procedures. For more information, see the applicable user guides.
Administrative
Procedure value
(in English)
8021X
ADDR
AGC
CLEAR
DEBUG
GROUP
HSEQUAL
INT
LOG
LOGOUT
MLS
RESET VALUES
RESTART
PHONE
May 2018
Purpose
Set 802.1X operational mode
Address information programming
Enable/disable Automatic Gain
Control
Clear all values to factory defaults
Enable/disable Debug Mode
Set the Group Identifier
Handset audio equalization
Interface Control
Enable/disable Event Logging
Log off the deskphone
View Multi-Language text Strings
Reset system initialization values to
defaults
Restart the deskphone
Installing and Administering Avaya J169/J179 IP Phone H.323
Comments on this document? infodev@avaya.com
See
See Setting the Operational Mode to 802.1X
page 35.
Use the pre-installation checklist.
Disabling/enabling automatic gain control
page 179.
Clearing the deskphone settings
Debug mode on page 39
Changing the group identifier
Setting handset audio equalization
page 180
Changing Ethernet interface control
page 40.
Disabling/enabling event logging
Loging off The deskphone
Viewing multi-language strings
Resetting system values
Restarting The deskphone
on
on
on page 38.
on page 181.
on
on
on page 41.
on page 42.
on page 42.
on page 43.
on page 44.
Table continues...
34