Administering Deskphones On Avaya Aura ® Communication Manager - Avaya J169 Installing And Administering

Administering your phone
part of the conference, the user must not answer the call, or the user must answer the call and
then hang up before continuing the conference setup. Pressing an in-use call appearance during
conference setup makes that call appearance the intended conferee. The Toggle Swap feature
works for Conference setup similar to Transfer Setup.
Related links
Communication Manager Administration
Administering deskphones on Avaya Aura
Manager
This section covers Avaya Aura
Administration Terminal (SAT) or by Avaya Site Administration. You must administer Avaya Aura
Communication Manager on SAT or by Avaya Site Administration to optimize the phone user
interface. The SAT provides the system-wide CM form and the particular page or screen that you
need to administer for each feature.
Related links
Communication Manager Administration
Feature-related system parameters
Feature-related system parameters
In Avaya Communication Manager, you can administer three system-wide parameters. When you
administer these parameters on CM, the parameters are automatically downloaded to the phone
during registration. You do not need to add these parameters using the settings file or set them
locally for each phone. The three system parameters are: SNMP community string, SNMP Source
IP addresses, and Craft Access Code (PROCPSWD).
Note:
Commenting out SNMPSTRING in the settings file will not prevent a response to an SNMP
query unless the CM administration is also changed accordingly. Also, setting the SNMP flag
on the IP-Options form in CM to "n" does not disable SNMP. You must enable the download
flag and leave the community string value blank so that when the telephone registers, the
SNMPSTRING value will remain null.
To administer these three parameters use Page 3 of the change system-parameters ip-options
form.
Name
On-hook Dialing on Terminals
May 2018
on page 72
®
Communication Manager administration on the Switch
on page 72
on page 78
Installing and Administering Avaya J169/J179 IP Phone H.323
Comments on this document? infodev@avaya.com
®
Communication
Description
Set up CM so that the phone supports on-hook
dialing. Use the System Parameters Features form
page 10. Use the command Change system-
parameters features to view the form and
make the change.
®
Table continues...
78